sales@ivojo.co.uk
01348 840080
WyreStorm TX-70-4K
1:1 4K HDMI / IR / RS-232 / Ethernet / PoH over HDBaseT Transmitter
1 × HDMI input; 1 × HDMI output; Max. 100 @ 4K using Cat7 cable, 70m using Cat6
Availability: Please Call
WyreStorm TX-70-4K
For flagship HDBaseT Transmission performance, look no further than the TX-70-4K. Class A HDBaseT transmission means support for 4K UHD content; even HDR-10 @24Hz, up to 70m/230ft. 2-way PoH and EDID management completes this fully-loaded specification.
CLASS A HDBASET™ TRANSMISSION
Sends HDMI signals of 4K UHD with HDR up to 70m/230ft and 1080p up to 100m/328ft with multi-channel audio, control, ethernet and PoH.
2-WAY POH
The TX-70-4K can either be powered by a PoH-compatible matrix or presentation switcher, or can itself deliver power to a receiver device such as the WyreStorm HDBaseT RX-70-4K or in cases where audio de-embed is required, the RX-70-4K-ARC.
CONTROL OPTIONS
Supports 2 methods of control pass-through. The TX-70-4K can handle both bi-directional IR and RS-232 when used as part of a compatible WyreStorm matrix or extender system.
ON-BOARD EDID MANAGEMENT
Offering 2 methods of EDID communication, the TX-70-4K is as capable with invisible communication as it is with the 4K video that you can see. An installer can select EDID passthrough from the connected screen/projector, or decide to use one of the embedded options for maximum flexibility.
See also: WyreStorm RX-70-4K.
WyreStorm TX-70-4K Key Features
- Low profile chassis of 18mm/0.7” for easier, more convenient installations in tight spaces
- Transmits discrete wide-band bidirectional IR control signal/routed serial commands (from compatible matrix) together within the HDMI signal over a single Cat5e/6
- Robust Class A HDBaseT transmission technology for stable 4K/HD distribution and control resistant to electrostatic and environmental interference compared to conventional UTP transmission
- Distribution of video (4K & 1080p), multichannel audio, bidirectional IR, POH power and 10/100 Ethernet over single Cat5e/6
- Multichannel audio supports 7.1 DTS Master HD and Dolby True HD
- HDMI v2.0 with HDCP 2.2
- Full 3D compatibility up to 1080p
- Switchable RS-232 selection for firmware update
- Power options – additional phoenix port and threaded DC for use of both standard and locking DC power plugs
- Visual LED indication for power supply, signal status to show display connection, HDCP in signal and Link between HDBaseT devices
- Automatically adjusts feedback, equalization and amplification of signal
- Energy efficient universal power supplies included
- Mounting brackets and IR connections included
WyreStorm TX-70-4K Specifications
Connectivity |
|
| Inputs | 1 × HDMI In: 19-pin HDMI type A female |
| Outputs | 1 × HDBaseT™ Out 8-pin RJ45 female |
| Ethernet | 1 × 8-pin RJ45 female, 10/100 Mbps auto-negotiating, Bidirectional over HDBaseT™ |
| IR | 1 × IR TX 3.5mm (1/8in) TS Mono, Bidirectional over HDBaseT |
| 1 × IR RX 3.5mm (1/8in) TRS Stereo, Bidirectional over HDBaseT | |
| RS-232 | 1 × 3-pin Phoenix Connector, Bidirectional over HDBaseT |
Resolution and Ma× Cable Length
| Video Resolutions | Distance | |
|---|---|---|
| HDMI | ||
| 1920×1080p @60Hz 12bit | 15m | |
| 1920×1080p @60Hz 16bit | 7m | |
| 3840×2160p @30Hz 8bit 4:4:4 | 7m | |
| 3840×2160p @24Hz 10bit 4:2:0 HDR | 3m | |
| 4096×2160p @60Hz 8bit 4:2:0 | 7m | |
| 4096×2160p @60Hz 8bit 4:4:4 | 7m | |
| HDBaseT | Cat6 | Cat6a/7 |
| 1920×1080p @60Hz 12bit | 100m | 100m |
| 1920×1080p @60Hz 16bit | 70m | 100m |
| 3840×2160p @30Hz 8bit 4:4:4 | 70m | 100m |
| 3840×2160p @24Hz 10bit 4:2:0 HDR | 70m | 100m |
| 4096×2160p @60Hz 8bit 4:2:0 | 70m | 100m |
| 4096×2160p @60Hz 8bit 4:4:4 | 70m | 100m |
| Output Video Encoding | HDBaseT™ Class A |
| Audio Formats | 2ch PCM, Up to DTS-X and Dolby Atmos |
Communication and Control |
|
| HDMI | HDMI, HDCP 2.2, EDID, DVI/D supported with adapter (not included) |
| HDBaseT | HDMI, HDCP 2.2, EDID, 2-way PoH, Bidirectional IR, RS-232, and Ethernet |
Mechanical |
|
| Power Supply | Input: 100~240V AC 50/60Hz, Output: 12V DC 2A |
| PoH | 48V 15.4W |
| Max Power Consumption | 26.5W |
Environmental |
|
| Operating Temperature | 32°F ~ 113°F (0°C ~ 45°C)10% ~ 90%, non-condensing |
| Storage Temperature | -4°F to ~ 158°F (-20°C ~ +70°C)10% ~ 90%, non-condensing |
| Maximum Btu | 90.42 BTU/hr |
Dimensions & Weight |
|
| Rack Units/wall Box | <1U |
| Height | 24.9mm/0.99in |
| Width | 220mm/8.67in |
| Depth | 89.9mm/3.54in |
| Weight | 0.52kg/1.14lbs |
Regulatory |
|
| Safety And Emission | CE, FCC, RoHS |
WyreStorm TX-70-4K Optional Cables
| Description | Length | Price | Inc. VAT | |
| WyreStorm EXP-HDMI-0.5M-8K 8K HDMI 2.1 Cable CL3 Rated | 0.5m | £18 | £21.60 | |
| WyreStorm EXP-4KUHD-0.5 High-speed 18Gbps 4K HDMI with HDR support | 0.5m | £13 | £15.60 | |
| WyreStorm EXP-HDMI-1M-8K 8K HDMI 2.1 Cable CL3 Rated | 1.0m | £20 | £24.00 | |
| WyreStorm EXP-4KUHD-1.0 High-speed 18Gbps 4K HDMI with HDR support | 1.0m | £15 | £18.00 | |
| WyreStorm EXP-HDMI-2M-8K 8K HDMI 2.1 Cable CL3 Rated | 2.0m | £23 | £27.60 | |
| WyreStorm EXP-4KUHD-2.0 High-speed 18Gbps 4K HDMI with HDR support | 2.0m | £17 | £20.40 | |
| WyreStorm EXP-HDMI-3M-8K 8K HDMI 2.1 Cable CL3 Rated | 3.0m | £28 | £33.60 | |
| WyreStorm EXP-4KUHD-3.0 High-speed 18Gbps 4K HDMI with HDR support | 3.0m | £22 | £26.40 |