Emailsales@ivojo.co.uk Telephone01348 840080

Lightware VINX-120-HDMI-ENC

1:1 AV Over IP Scaling Multimedia Encoder with USB KVM, RS-232 and IR

£880 (£1056.00 inc. VAT)
Availability: Please Call

Lightware VINX-120-HDMI-ENC (91810002)

VINX-120-HDMI-ENC is a LAN based encoder multimedia device to extend HDMI video from a local source to a remote sink. The VINX encoder and decoder devices connect either via a direct CATx cable connection or through a Gigabit Ethernet switch in between. The maximum delivery distance can reach to up to 100 m with minimal latency and employing a quality, proprietary wavelet transform based image compression.

The maximum supported resolution is 3840 x 2160 @ 30Hz with 7.1 audio.

VINX devices support both static and dynamic (DHCP) IP address settings. 100 factory EDID presets and five user EDIDs are stored in the encoder. These units feature embedded web for control.

Front panel DIP switches serve quick manual setting for pairing maximum 15 encoder devices to decoders over the network, a quick and easy installation advantage for digital signage applications. Gap and bezel compensation can be adjusted for video walls. Scaling is available on the decoder side and videos can be freely cropped. With the help of the VINX Video Wall Wizard, installation of a video wall can be reduced to one tenth of the usual time needed when using similar, third party products.

Network Requirements

1GbE network with Layer 3 switch (IGMPv2, IGMP Snooping, IGMP Fast Leave, Jumbo Frame Support, Multicast Filtering).


See also: Lightware VINX-110-HDMI-DEC.

Lightware VINX-120-HDMI-ENC Key Features

  • 3840 x 2160 @ 30Hz resolution over a 1 Gigabit network with very low latency
  • Up to HDMI 2.0 4K 2160p@60Hz 4:2:0 Video Input supported
  • Audio supports LPCM and Dolby Digital /Dolby Digital Plus/DTS/ Dolby TruHD/DTS-HD bit stream
  • HDCP compliant
  • Local HDMI port for monitoring on the TX
  • Variable maximum bit rate (10 Mbps ~ 800 Mbps)
  • USB pass-thru for IP KVM application
  • LED feedbacks, DIP switches and physical buttons for quick and easy setup and operation
  • Embedded web control, direct and networked control via PC
  • The device can be controlled via Lightware's proprietary LW3 protocol commands
  • Gap and bezel compensation for video wall applications, cropping adjustment capability
  • Output video signal scaling to adjust to sink properties
  • Order Code: 91810002
HDMI

Lightware VINX-120-HDMI-ENC Specifications

Component Type Encoder (Transmitter)
Dimensions
(D X W X H) 140 x 119 x 26 mm
AV Interface HDMI Female (In), HDMI Female (Out, Loopback)
USB Device Mini USB Type B
Tx/Rx Connector RJ45 Female
Switch 4 Position Dip Switch
IR 3.5 mm Jack Female
RS-232 RJ12 Female
Max. Image Resolution 3840 x 2160 @30Hz
Power Adapter DC 5V
Operation Temperature 0-40°C
Storage Temperature -20-60°C
Humidity 0-90% RH, Non-condensing
Weight 310g
Housing Metal Enclosure
Safety/emission CE, FCC

Lightware VINX-120-HDMI-ENC Usage Diagram



Lightware VINX-120-HDMI-ENC Usage Diagram


Lightware VINX-120-HDMI-ENC Possible Alternatives

Product CodeDescriptionPriceInc. VAT
Lightware VINX-110-HDMI-DEC 1:1 AV Over IP Scaling Multimedia Decoder with USB KVM, RS-232 and IR £880 £1056.00
CYP IP-6000RX 1:1 HDMI/VGA with USB over IP receiver 1 × RJ45, 1 × 3.5mm mic inputs; 1 × HDMI, 1 × HD15, 1 × RS-232, 1 × 3.5mm IR emitter, 4 × USB Type B, outputs £345 £414.00
Kramer KDS-8 1:1 4K HDMI over IP SDVoE Transceiver Encodes or decodes HDMI, IR, RS-232 and analogue audio with zero latency £1272 £1526.40
Kramer KDS-8F Zero Latency 4K HDR SDVoE Video Streaming Transceiver over Fiber Optic £2660 £3192.00
Kramer KDS-DEC7 High-performance, highly-scalable, AV over IP Decoder 4K60 4:2:0 or 4K30 4:4:4 over 1G network, USB Host, Unicast and Multicast support £617 £740.40
Kramer KDS-EN7 High-performance, highly-scalable, AV over IP Encoder 4K60 4:2:0 or 4K30 4:4:4 over 1G network, USB Host, Unicast and Multicast support £617 £740.40
Kramer WP-DEC7 1:1 High-performance, highly-scalable, AVoIP Wall Plate Decoder for 4K60 4:2:0, HDR10 over 1G network 2 × RJ45 inputs; 1 × HDMI output £1600 £1920.00
Kramer WP-SW2-EN7 2:1 High-performance, highly-scalable, AVoIP Walll Plate Encoder for 4K60 4:2:0 HDR10 over 1G network 1 × HDMI, 1 × USB-C inputs; 2 × RJ45 output £960 £1152.00
WyreStorm NHD-400-E-RX 1:1 4K Video Over IP Decoder with HDR and Scaling 1 × HDMI Input; 1 × RJ45 output £563 £675.60
WyreStorm NHD-400-E-TX 1:1 4K Video Over IP Encoder with HDR and Scaling 1 × HDMI Input; 1 × RJ45 output £563 £675.60