The Kramer WP-EN6 is a wall-plate video encoder that provides streaming of 4K@60Hz (4:2:0), HDCP 2.2, HDMI video, IR, RS-232, and USB signals over an IP network in unicast (one-to-one) or multicast (many-to-many) configurations.
Connectivity |
|
Inputs | 1 HDMI × On an HDMI connector |
Ports | 1 × RS–232: On a 3–pin terminal block connector |
1 × USB: On a USB type–B connector | |
1 × IR (Tx): On 3.5mm mini jack | |
1 × IR (Rx): On 3.5mm mini jack | |
1 × Ethernet (LAN/PoE): On an RJ–45 connector | |
Network |
|
Network | 10M/100M/1000M |
Network Switch Requirements | 1G multicast, IMGP snooping non–blocking, Layer 2 |
Streaming | Unicast and multicast through RTSP (Real Time Streaming Protocol) |
IR | Wide–band 20kHz to 60kHz bidirectional IR transmission |
Audio / Video Specifications |
|
Bit Rates | Peak - 850Mbps, 4K average - 350Mbps, 1080p average - 250Mbps |
Compression Standard | JPEG 2000 |
Resolutions | 4096×2160@60Hz, 3840×2160@60Hz, 1920×1200@60Hz, 1920×1080@60Hz, 1864×1050@60Hz, 1856×1392@60Hz, 1792×1344@60Hz, 1728×1080@60Hz, 1704×960@60Hz, 1680×1050@60Hz, 1600×1200@60Hz, 1600×1050@60Hz, 1600×900@60Hz, 1536×960@60Hz, 1440×900@60Hz, 1440×576@60Hz, 1440×480@60Hz, 1400×1050@60Hz, 1366×768@60Hz, 1360×768@60Hz, 1280×1024@60Hz, 1280×960@60Hz, 1280×800@60Hz, 1280×768@60Hz, 1280×720@60Hz, 1224×768@60Hz, 1152×864@60Hz, 1152×720@60Hz, 1024×768@60Hz, 1064×600@60Hz, 1024×384@60Hz, 960×600@60Hz, 848×480@60Hz, 800×600@60Hz, 768×480@60Hz, 720×576@60Hz, 720×480@60Hz, and 640×480@60Hz, 640×400@60Hz, 640×350@60Hz |
Content Protection | HDCP 2.2 |
Scaling And Cropping | Built in scaling and cropping for flexible display of source content on the decoder output |
Audio |
|
Channels (HDMI embedded Audio) | PCM 2, 5.1, 7.1 Channel, Dolby Digital 5.1 Channel, Dolby Digital Plus, Dolby Digital True–HD, DTS 5.1 Channel, DTS–ES, DTS–HD High Resolution, DTS–HD Master Audio |
User Interface |
|
Controls | Reset button, channel display |
Indicators | Device ID, link and power LEDs |
Power |
|
Source | PoE |
Consumption | 400mA max |
Accessories Included | White Decora® or similar frame set |
Optional | 12v external DC power supply |
Environmental Conditions |
|
Operating Temperature | 0° to +40°C (32° to 104°F) |
Storage Temperature | –40° to +70°C (–40° to 158°F) |
Humidity | 10% to 90%, RHL non–condensing |
Product Code | Description | Price | Inc. VAT |
Kramer KDS-8 | 1:1 4K HDMI over IP SDVoE Transceiver Encodes or decodes HDMI, IR, RS-232 and analogue audio with zero latency |
£1152 | £1382.40 |
Kramer KDS-8F | Zero Latency 4K HDR SDVoE Video Streaming Transceiver over Fiber Optic | £1607 | £1928.40 |
Kramer KDS-DEC3 | 1:1 H.264 Decoder Decode H.264 to HDMI from transmission over IP networks |
£778 | £933.60 |
Kramer KDS-DEC4 | 1:1 HD HDMI over IP receiver/decoder | £584 | £700.80 |
Kramer KDS-DEC5 | 1:1 4K 60Hz H.264 Video Decoder supporting PoE and Video Wall | £778 | £933.60 |
Kramer KDS-DEC6 | 1:1 4K 60Hz HDCP 2.2 video over IP receiver/decoder with PoE | £599 | £718.80 |
Kramer KDS-EN2R | 1:1 HDMI over IP receiver Point to point, Multicasting & broadcasting architecture |
£498 | £597.60 |
Kramer KDS-EN2T | 1:1 HDMI over IP transmitter Point to point, Multicasting & broadcasting architecture |
£498 | £597.60 |
Kramer KDS-EN3 | 1:1 HDMI/VGA to H.264 Encoder, Recorder and Streamer Encode HDMI up to 1080p for transmission over IP networks |
£1301 | £1561.20 |
Kramer KDS-EN4 | 1:1 HD HDMI over IP Encoder/streamer | £584 | £700.80 |
Kramer KDS-EN5 | 1:1 4K 60Hz H.264 Encoder | £778 | £933.60 |
Kramer KDS-EN6 | 1:1 4K 60Hz HDCP 2.2 video over IP transmitter/encoder with PoE | £599 | £718.80 |
CYP IP-6000RX | 1:1 HDMI/VGA with USB over IP receiver 1 × RJ45, 1 × 3.5mm mic inputs; 1 × HDMI, 1 × HD15, 1 × RS-232, 1 × 3.5mm IR emitter, 4 × USB Type B, outputs |
£329 | £394.80 |
Gefen EXT-ADA-LAN-RX | 1:1 Digital and Analogue Audio of IP Receiver | £521 | £625.20 |
Gefen EXT-ADA-LAN-TX | 1:1 Digital and Analogue Audio of IP Transmitter/Sender | £521 | £625.20 |