Kramer WP-562 Description

The WP-562 is a DGKat twisted pair receiver for HDMI and IR signals. The WP-561 converts an HDMI and IR signal to a twisted pair signal and the WP-562 converts the twisted pair signal back to an HDMI and IR signal.

Kramer WP-562 Key Features

• Max. Data Rate - 1.65Gbps.
• HDTV Compatible.
• HDCP Compliant.
• Bidirectional IR Support - IR is compatible with a Kramer transmitter and via a Kramer external remote IR receiver: C-A35M/IRR or C-A35M/IRE or C-A35M/2IRE.
• HDMI Support - HDMI (V.1.4 with HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD).
• EDID PassThru - Passes EDID/HDCP signals from source to display.
• Optional IR Emitter Cables - C-A35/IRE-10 single emitter & C-A35/2IRE-10 dual emitter.
• Optional External IR Receiver Cable - C-A35M/IRR-3 and C-A35M/IRR-50.
• System Range - Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC-DGKat524 cable. Up to 90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC-DGKat623 cable. Up to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BC-DGKat7a23 cable.
• Cable - Requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer's BC-DGKat524, BC-DGKat623 and BC-DGKat7a23 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
• Status LEDs - ON (red), transmit (green).
• Power Connect System - A single connection to the transmitter powers the receiver.
• Dimensions - 6.9cm x 2.88cm x 11.4cm (2.71" x 1.13" x 4.49") US; 8.6cm x 2.88cm x 8.6cm (3.39" x 1.13" x 3.39" and 8cm x 2.88cm x 8cm (3.15" x 1.13" x 3.15") EU W, D, H.
• Wall Plate Size - 1 gang EU/US.