Optoma ZH506e White
Optoma ZH506e White Key Features
- 5500 ANSI Lumens
- Native Widescreen
- 1080P 1920*1080 Native Resolution
- 30000 hour lamp life (typical)
- 300000:1 Contrast Ratio
- Native Widescreen
- Lens Shift
- Direct Power On
- Horizontal & Vertical Keystone Correction
- Direct Power Off
- Portrait Mode
- MHL
- Can Be Installed Vertically
- Logo capture and display
- PIN Code Security
- Warrantied for 24/7 use
- High Dynamic Range (HDR) Ready
- DICOM Simulation Mode
- 3D Projection Ready
- sRGB Colour Mode
- Monitor Out
- Network Control
- 5.5kg (12.1lb.)
- Finished in White
- Click for Optoma ZH506e White Detailed Specifications
Throw Calculator
Lens | Minimum Throw |
Maximum Throw |
Foot Lamberts |
---|---|---|---|
Standard Lens | 0.92m | 1.48m | 2086 |
Optoma ZH506e White Throw Chart
Along the horizontal axis is the distance in metres between the front of the projector and the projection screen. Up the vertical axis is the width of the image the projector will produce. We use width rather than diagonal as the width will remain consistent with the throw distance and zoom setting whereas the height and therefore the diagonal will vary depending on the source. For example, if you have a 4:3 aspect ratio projector and use it to watch a 16:9 aspect ratio DVD then the image will be "letterboxed", i.e. the width will remain the same but the height will be reduced.
Projector Throw From Screen Size Table (16:9 aspect ratio, in metres)
Diag. | Width | Height | Min. Throw | Max Throw | Area | Nits |
0.76 | 0.66 | 0.37 | 0.93 | 1.48 | 0.25² | 7093.8 |
1.00 | 0.87 | 0.49 | 1.22 | 1.95 | 0.43² | 4097.4 |
1.50 | 1.31 | 0.74 | 1.83 | 2.93 | 0.96² | 1821.1 |
2.00 | 1.74 | 0.98 | 2.44 | 3.90 | 1.71² | 1024.4 |
2.50 | 2.18 | 1.23 | 3.05 | 4.88 | 2.67² | 655.6 |
3.00 | 2.61 | 1.47 | 3.66 | 5.86 | 3.85² | 455.3 |
3.50 | 3.05 | 1.72 | 4.27 | 6.83 | 5.23² | 334.5 |
4.00 | 3.49 | 1.96 | 4.88 | 7.81 | 6.84² | 256.1 |
4.50 | 3.92 | 2.21 | 5.49 | 8.79 | 8.65² | 202.3 |
5.00 | 4.36 | 2.45 | 6.10 | 9.76 | 10.68² | 163.9 |
Nits are a measure of the brightness of the final image. Multiply the figure in the Nits column by the gain of your screen to obtain a true figure.
Projector lamps dim over their life spans so make allowances by multiplying the foot nits by 0.75 to get a reasonable average.If you intend to calibrate your projector then this will also affect brightness. For home cinema use in a well darkened roon, about 42-70 Nits is ideal. For office use, aim for at least 175.
Screen Size For Given Throw Table
Throw | Min. Width | Max. Width |
1.00 | 0.45 | 0.71 |
1.00 | 0.45 | 0.71 |
1.50 | 0.67 | 1.07 |
2.00 | 0.89 | 1.43 |
2.50 | 1.12 | 1.79 |
3.00 | 1.34 | 2.14 |
3.50 | 1.56 | 2.50 |
4.00 | 1.79 | 2.86 |
4.50 | 2.01 | 3.21 |
5.00 | 2.23 | 3.57 |
5.50 | 2.46 | 3.93 |
6.00 | 2.68 | 4.29 |
6.50 | 2.90 | 4.64 |