WyreStorm EX-100-H2-EARC
1:1 UHD HDMI over Twisted Pair Transmitter and Receiver Kit
Max. 100m at UHD 4:2:2 using Cat6a/7 cable
Availability: Please Call
WyreStorm EX-100-H2-EARC
Extend 18Gbps A/V signals up to 100 meters with the WyreStorm EX-100-H2-EARC. This extender uses AVX technology, a similar transmission that is found inside our powerful NetworkHD 600 series, to send 4K HDR and Dolby Vision content at 60Hz. Compatible with eARC, you can transmit audio signals such as Dolby TrueHD/Atmos and DTS-HD MA 7.1 signals from a smart TV back to an eARC enabled AVR or soundbar. Flexible control passthrough options including IR, RS-232 and LAN allow you control a display and get devices connected over long distances.
4K HDR & DOLBY VISION
Sporting an 18Gbps HDMI input, the EX-100-H2-EARC can support all UHD video signals up to and including 2160p 4:4:4/60, and high framerate HDR 12bit 4:2:2 up to 60Hz.
EARC
Equipped with eARC capability, send high-bitrate audio formats such as Dolby Atmos or DTS:X from an eARC display back to an AVR or soundbar through native HDMI. Let’s not forget backwards compatibility with standard ARC as well.
Flexible Control
Passthrough signals such as IR and RS-232 from a control system to control your display or other AV equipment. The ethernet passthrough supports full 1Gbps speeds for extending internet or LAN connections.
Power Over Ethernet
A standard feature in most WyreStorm extenders, simply power the transmitter side of the extender and the receiver will power over the category cable. Reducing points of failure and making installation easier.
WyreStorm EX-100-H2-EARC Key Features
- Supports the latest UHD resolutions including HDR10, HLG and Dolby Vision formats
- Extend 18Gbps content up to 100 meters using Cat6a cabling or higher
- Compatible with eARC displays for transmitting high-bitrate audio formats including Dolby Atmos and DTS:X
- Backwards compatible with standard ARC
- Uses powerful AVX transmission technology
- Supports full CEC passthrough via TV remote to control connected AV equipment such as AVR volume or menu navigation
- PoE allows the transmitter to power the receiver over category cable
- 3 audio modes configured by dipswitches: eARC, S/PDIF passthrough, HDMI input de-embed
- Control signal passthrough via bidirectional IR, 2-way RS-232 and Gigabit LAN
WyreStorm EX-100-H2-EARC Downloads
WyreStorm EX-100-H2-EARC Specifications
Connectivity |
|
Transmitter | |
Inputs | 1 × HDMI in: 19-pin type A |
Outputs | 1 × AVX Out: 8-pin RJ45 Female |
1 × S/PDIF Out: Toslink Audio | |
Receiver | |
Inputs | 1 × AVX In: 8-pin RJ45 Female |
1 × S/PDIF In: Toslink Audio | |
Outputs | 1 × HDMI Out: 19-pin type A |
Resolution and Max Cable Length
Video Resolutions | Distance | |
---|---|---|
HDMI | ||
1920×1080p @120Hz 12bit | 7m | |
3840×2160p @30hz 8bit 4\ 4:4 | 7m | |
3840×2160p @30hz 12bit 4\ 2:2 | 7m | |
HDBaseT | Cat6 | Cat6a/7 |
1920×1080p @120Hz 12bit | 70m | 100m |
3840×2160p @30hz 8bit 4\ 4:4 | 70m | 100m |
3840×2160p @30hz 12bit 4\ 2:2 | 70m | 100 |
Processing |
|
Supported Standards | DCI, RGB, HDR, HDR10, Low Latency Dolby Vision up to 60Hz, HLG, BT.2020, BT.2100 |
Maximum Pixel Clock | 600MHz |
Communication and Control |
|
HDMI | HDMI, HDCP 2.2, EDID, CEC Pass-through, DVI/D supported with adapter (not included) |
Avx | HDMI, HDCP 2.2, EDID, Audio, 1-way PoC (TX powers RX), Bidirectional IR/RS-232/Ethernet, CEC |
Ethernet | 1 × Ethernet: 8-pin RJ45 Female, Bidirectional over AVX (Transmitter and Receiver) |
Ir | 1x IR RX: 3.5mm (1/8in) TRS Stereo, 1x IR TX: 3.5mm (1/8in) TS Mono (Transmitter and Receiver) |
RS-232 | 1 × RS-232: 3-pin Phoenix (Transmitter and Receiver) |
Power |
|
Power Supply | 12V DC 3A |
Max Power Consumption | 24W |
Environmental |
|
Operating Temperature | 32°F ~ 113°F (0°C ~ 45°C) |10% ~ 90%, non-condensing |
Storage Temperature | -4°F to ~ 158°F (-20°C ~ +70°C), 10% ~ 90%, non-condensing |
Maximum Btu | 82 BTU/hr |
Dimensions & Weight |
|
Rack Units/wall Box | <1U |
Height | 25mm/0.98in |
Width | 215mm/8.46in |
Depth | 140mm/5.51in |
Weight | 0.79kg/1.75lbs |
Regulatory |
|
Safety And Emission | CE, FCC, RoHS, RCM, EAC |
WyreStorm EX-100-H2-EARC Possible Alternatives
Product Code | Description | Price | Inc. VAT |
Kramer PT-571 | 1:1 DGKat HDMI 1.4 Twisted Pair Transmitter Max. 70m at 1080P using Kramer STP cable | £171 | £205.20 |
Kramer PT-572+ | 1:1 DGKat HDMI 1.4 Twisted Pair Receiver Max. 70m at 1080P using Kramer STP cable | £171 | £205.20 |
Kramer PT-871/2xr-KIT | 1:1 4K HDR HDMI 2.0 Compact PoC over Long-Reach DGKat 2.0 transmitter and reciever Max. 60m at 4K-4:4:4, 70m at 4K-4:2:0, HDR, HDMI2.0 and HDCP 2.2, PoC | £359 | £430.80 |
Kramer PT-871xr | 1:1 4K HDR HDMI Compact PoC Transmitter over Long-Reach DGKat 2.0 PoC, HDMI 2.0, HDCP 2.2; Max. 60M over Kramer STP | £313 | £375.60 |
Kramer PT-872xr | 4K HDR HDMI Compact Receiver over Long-Reach DGKat 2.0 Max. 70m at 4K-4:4:4, 70m at 4K-4:2:0, HDR, HDMI2.0 and HDCP 2.2, PoC | £188 | £225.60 |
Kramer TP-752R | 1:1 HDMI Ultra-Reach Receiver with RS-232 & Loop, over Any 2-Wire Cable 1 × HDMI input; 1 × HDMI output; Max. 600m at 1080p | £376 | £451.20 |
Kramer TP-752T | 1:1 HDMI Ultra-Reach Transmitter with RS-232 & Loop, over Any 2-Wire Cable 1 × HDMI input; 1 × HDMI output; Max. 600m at 1080p | £376 | £451.20 |
Kramer WP-571 | 1:1 DGKat HDMI over Twisted Pair Wall Plate Transmitter Max. 90m at 1080P using Kramer STP cable | £173 | £207.60 |
Kramer WP-871xr | 4K HDR HDMI Transmitter DGKat 2.0 Wall-Plate finished in white PoC, HDMI 2.0, HDCP 2.2; Max. 60M over Kramer STP | £185 | £222.00 |