Extron DTP2 CrossPoint 82 (60-1812-01)

8×2 4K/60 Scaling Presentation Matrix Switcher

5 × HDMI, 1 × DisplayPort, 2 × DTP2 inputs; 1 × HDMI, 1 × DTP2/HDBaseT outputs

Extron DTP2 CrossPoint 82 60-1812-01 product image

Extron DTP2 CrossPoint 82 60-1812-01 connectivity (terminals) product image

For pricing and configuration options please call or email us.

The Extron DTP2 CrossPoint 82 is an 8x2 matrix switcher that supports signal resolutions up to 4K/60 at 4:4:4 for all inputs and outputs. It features DisplayPort and HDMI inputs, an HDMI output, and Extron DTP2 extension to send 4K/60 video, audio, and control signals up to 330 feet (100 meters) over a shielded CATx cable. The DTP2 matrix output is powered by Extron Vector™ 4K scaling technology, capable of seamless switching, logo keying, and scaled resolutions up to 4K/60. A built-in Extron IP Link® Pro control processor and integrated 100‑watt Class D power amplifier make the DTP2 CrossPoint 82 an all-in-one system design solution. It delivers excellent image quality, fast and reliable switching, along with Extron ProDSP audio processing and an HDMI loop-through.

The DTP2 CrossPoint 82 delivers all of the core functionality of a conventional AV system, in a single enclosure that replaces as many as ten separate components. In addition to saving substantial space in a rack, the compact enclosure makes it easy to standardize on a common system design throughout a facility, and to adapt this DTP2 CrossPoint® matrix switcher to many different environments where equipment space may be limited. This full-featured presentation matrix switcher is highly versatile and is ideal for presentations with content on multiple displays, and for providing a variety of AV system configurations to serve multi-purpose and divisible rooms.

Integrated 8x2 Matrix Switcher with Exclusive Vector 4K Scaling

The DTP2 CrossPoint 82 streamlines integration with computers equipped with compatible graphics cards, 4K media players, 4K cameras, and displays at 4K or UHD native resolution. All DisplayPort, HDMI, and DTP2 inputs accept high resolution signals up to 4K. The matrix switcher incorporates the Extron Vector 4K scaling engine that is specifically designed with best‑in‑class image upscaling and downscaling. The scaled DTP2 twisted pair output delivers sharp, accurate scaling of standard definition and high definition signals up to 4K, as well as downscaling of 4K source signals for lower resolution displays without losing critical image detail. For optimal picture quality, the DTP2 CrossPoint 82 delivers 4K video with 4:4:4 Colour sampling.

Matrix switching between the inputs and outputs enables a wide range of design possibilities to meet the audio and video requirements of boardrooms, lecture halls, and other applications with multiple displays. Flexible signal routing and reliable digital video switching with the DTP2 CrossPoint 82 allows support for multiple applications in one installation. For professional, glitch-free transitions between sources, it offers a range of switching effects on the scaled DTP2 video output. These include a freeze/fade transition that fades out a final frozen frame of the previous input source as the newly selected source fades in, a cut through black transition, and a fade through black transition. In addition, the DTP2 CrossPoint 82 provides the capability to insert a custom graphic logo, such as a company logo, into any presentation when using the scaled DTP2 output.

Support Local and Remote Sources and Displays

The DTP2 CrossPoint 82 includes one DisplayPort and five HDMI inputs. The two DTP2 twisted pair inputs and the DTP2 output are compatible with a wide variety of DTP2 endpoints, as well as all DTP® endpoints, distribution amplifiers, and switchers to support remote HDMI, DisplayPort, and DVI equipment. The DTP2 inputs can receive signals from remote transmitters in areas such as a conference table, lectern, or wall for connecting a guest laptop. The scaled DTP2 output can be used to transmit from a DTP2 CrossPoint 82 in a rack to a DTP2 receiver behind a flat-panel display on a wall, above a ceiling-mounted projector, or any other remote location. The non-scaled HDMI output is ideal for connection of a local monitor. The HDMI loop-through output is selectable for any input. DTP2 transmitters and receivers are available in compact, low‑profile enclosures and floor box form factors.

When the DTP2 CrossPoint 82 is paired with DTP2 and DTP 330 transmitters and receivers, HDMI, DisplayPort, DVI, or VGA, plus control and Analogue audio signals can be extended up to 330 feet (100 meters) over a single shielded CATx cable. With a DTP 230 endpoint, signals can be extended up to 230 feet (70 meters).

The DTP2 twisted pair inputs and output include additional convenient, integrator-friendly features designed to help simplify installation. Bidirectional RS‑232 and IR signals can be inserted from a control system and transmitted over the same shielded CATx cable, streamlining system design and installation.

Compatible with XTP CrossPoint Series Matrix Switchers

In addition to supporting DTP endpoints, the DTP2 CrossPoint 82 can be integrated into an XTP® matrix switching system with digital video and embedded audio, plus bidirectional RS‑232 and IR signal extension up to 330 feet. This is ideal for facility-wide AV system applications with a centralized AV signal distribution infrastructure, as well as several presentation spaces with local AV switching and processing. A DTP2 CrossPoint 82 in a room can connect into an XTP II CrossPoint or XTP CrossPoint matrix switcher in a central equipment rack or closet for accessing shared AV resources or sending a local presentation to several destinations in a facility.

HDBaseT-Compatible Outputs

The DTP2 output can be configured for compatibility with HDBaseT™-enabled displays to send digital video and embedded audio, plus bidirectional RS‑232 and IR signals up to 330 feet (100 meters) over a shielded CATx cable.

Built for Easy Source Integration, Reliable Operation, and Quick Switching

The DTP2 CrossPoint 82 is HDCP 2.3 compliant and delivers highly reliable digital switching of HDMI signals. To simplify integration of HDMI sources and displays, and to help ensure optimal system performance and dependability, the DTP matrix switcher features multiple Extron-exclusive technologies, including EDID Minder®, Key Minder®, and SpeedSwitch®. EDID Minder manages EDID communication between the display devices and input sources to ensure that the correct video formats are displayed reliably. For HDMI signals with protected content, Key Minder authenticates and maintains continuous HDCP encryption between input and output devices to ensure quick and reliable switching. With SpeedSwitch Technology, the DTP2 CrossPoint 82 delivers exceptional, virtually instantaneous switching speeds for HDCP-encrypted content.

ProDSP Audio Integration and Available Power Amplifier

Each DTP2 CrossPoint 82 model features Extron ProDSP™, the same full-featured, high performance audio signal processing found in the Extron DMP 128 Plus and DMP 64 digital signal processors. Extron's exclusive ProDSP is engineered from the ground up using a powerful 64‑bit floating point DSP engine to provide very wide dynamic range and reduce the potential for clipping. ProDSP also utilizes studio grade 24‑bit audio converters with 48 kHz sampling to maintain audio signal transparency. DTP2 CrossPoint 82 ProDSP is loaded with a comprehensive selection of powerful, easy‑to‑configure tools to control audio embedding, de‑embedding, mic/line mixing with ducking, feedback suppression, dynamics, equalization, delay, and phantom power.

DTP2 CrossPoint 82 models are available with a choice of integrated power amplifiers. DTP2 CrossPoint 82 IPCP SA delivers stereo power amplification with 50 watts rms per channel into 4 ohms or 25 watts rms per channel into 8 ohms, while DTP2 CrossPoint 82 IPCP MA 70 provides mono 70-volt amplification with 100 watts rms output. Each features an Extron-exclusive Class D amplifier design with patented CDRS™ - Class D Ripple Suppression technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifier designs.

Multiple Options for Local and Remote Operation

The DTP2 CrossPoint 82 features front panel controls and intuitive on‑screen menus for quick access to functions. Remote configuration and control are available via USB, RS‑232, and Ethernet. The DTP2 CrossPoint 82 can be configured using Extron's PCS - Product Configuration Software with a user-friendly GUI that is very easy to navigate. This software application allows for expedited setup and commissioning, real-time operation and monitoring, plus the ability to configure multiple Extron products units in the same session.

Extron DTP2 CrossPoint 82 Key Features

All-in-one 8x2 matrix switcher, scaler, audio DSP, audio power amplifier, and control processor - One box delivers all of the core functionality of a large AV system. Advanced technological capabilities from Extron allow complete system design and integration within a compact enclosure.
DTP2, DisplayPort, and HDMI inputs - The DTP2 CrossPoint 82 features one DisplayPort, five HDMI, and two DTP2 inputs with one HDMI loop-through output selectable for any input.
DTP2 and HDMI outputs - Features one scaled DTP2 and one non‑scaled HDMI output.
Advanced Extron Vector™ 4K scaling engine - The Vector 4K scaling engine is specifically designed for critical-quality 4K imagery, with best-in-class image upscaling and downscaling.
Selectable scaled DTP2 output rates from 640x480 to 4K/60 with 4:4:4 Colour sampling
Logo image keying and display - A logo graphic can be positioned and keyed over the live DTP2 video output. Logo graphics in BMP, GIF, JPG, PNG, or TIFF format may be uploaded to the unit. Full-screen images up to 4K resolution can also be displayed to eliminate loss of video between presentations.
Displays user-supplied images for screen saver, corporate branding, logo insertion, and HDCP notification - Custom, user-loaded images can be displayed as a screen saver after a predefined duration of inactivity at the video input, or whenever the input is disconnected between presentations. User-supplied images can also be displayed for HDCP Visual Confirmation, whenever HDCP‑encrypted content is transmitted to a non‑HDCP compliant display.
Selectable seamless switching transitions - Seamless freeze/cut, freeze/fade, cut through black, and fade through black transition effects are available at the scaled DTP2 video output.
HDCP 2.3 compliant - Ensures display of content-protected 4K video media and maintains interoperability with earlier versions of HDCP.
Integrated audio digital signal processor with ProDSP™ 64‑bit processing - The DTP2 CrossPoint 82 features 64‑bit floating-point audio DSP processing, which maintains very wide dynamic range and audio signal transparency to simplify gain stage management while reducing the possibility of DSP signal clipping.
Available with energy efficient Class D stereo or mono amplifier:
2 x 50 watts @ 4 ohms; 2 x 25 watts @ 8 ohms
1 x 100 watts @ 70 volts - DTP2 CrossPoint 82 power amplifiers feature an Extron-exclusive, highly efficient, advanced Class D amplifier design with CDRS - Class D Ripple Suppression, an Extron-patented technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifier designs. CDRS eliminates the high frequency switching ripple characteristic of Class D amplifiers, a source of RF emissions, which can interfere with sensitive AV equipment such as wireless microphones.
Supports DisplayPort SST - Single Stream Transport data rates up to 21.6 Gbps
Supported HDMI 2.0 specification features include data rates up to 18 Gbps, Deep Color, and HD lossless audio formats
Stereo audio embedding and de‑embedding - Analogue audio signals can be embedded onto the DTP2 output, and embedded two channel PCM audio can be extracted to the Analogue outputs.
RS‑232 insertion from the Ethernet control port - Saves system resources and simplifies installation by enabling a control processor to access remote RS‑232 devices over Ethernet.
CEC - Consumer Electronics Control Capability - Standard, built‑in CEC commands can be triggered to control displays or other AV devices connected to the HDMI and DTP2 outputs. Each video output can deliver CEC commands independently. The ability to control specific functions, such as power on/off, input selection, or volume level, is dependent on implementation by the device manufacturer.
Integrated DTP2 extension supports transmission of video, audio, and control up to 330 feet (100 meters) over a shielded CATx cable
Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance
Compatible with CATx shielded twisted pair cable - The DTP2 CrossPoint 82 supports a maximum transmission distance of 330 feet (100 meters) for all compatible resolutions when used with CATx shielded twisted pair cable. Shielded twisted pair cabling with solid centre conductor sizes of 24 AWG or better is recommended for optimal performance.
Remote powering of select DTP transmitters and receivers - The DTP2 CrossPoint 82 can provide power to select DTP or DTP2 transmitters and receivers over the twisted pair connection, eliminating the need for a separate power supply at the remote unit.
Accepts additional Analogue stereo audio - Supports stereo Analogue audio signals for simultaneous transmission over the same shielded twisted pair cable.
Bidirectional RS‑232 and IR pass‑through for AV device control - Bidirectional RS‑232 control and IR signals can be transmitted alongside the video signal over the DTP connection, allowing the remote device to be controlled without the need for additional cabling. Bidirectional control extension eliminates the need for control system wiring to remote devices.
Compatible with all DTP‑enabled products, plus XTP CrossPoint® matrix switchers - Enables mixing and matching with desktop and wallplate endpoints, as well as other DTP and DTP2‑enabled products to meet application requirements. The DTP2 CrossPoint 82 presentation matrix switcher can be integrated with XTP® and XTP II CrossPoint matrix switchers to provide connectivity between presentation spaces and a larger, facility-wide system.
DTP2 output is compatible with HDBaseT‑enabled devices - The DTP2 CrossPoint 82 can be configured to send video and embedded audio, plus bidirectional RS‑232 and IR signals to an HDBaseT‑enabled display.
User-selectable HDCP authorization for DTP2 and HDMI inputs - Allows inputs 2 through 8 to appear HDCP compliant or non-HDCP compliant to the connected source, which is beneficial if the source automatically encrypts all content when connected to an HDCP-compliant device. Protected material is not passed in non-HDCP mode.
Key Minder® continuously verifies HDCP compliance for quick, reliable switching - Key Minder authenticates and maintains continuous HDCP encryption between input and output devices to ensure quick and reliable switching in professional AV environments, while enabling simultaneous distribution of a single source signal to one or more displays.
Comprehensive EDID management - Use PCS software to access EDID Minder for setting video input EDID, capturing EDID from connected displays, or uploading custom EDID files. Proper EDID management ensures that sources and displays are easily integrated into a system resulting in optimized system operation. Freely downloadable EDID Manager 2.0 software is available for advanced EDID editing and creating custom EDID files.
EDID Minder® automatically manages EDID communication between connected devices - EDID Minder ensures that the source powers up properly and reliably outputs content for display.
SpeedSwitch® Technology provides exceptional switching speed for HDCP-encrypted content
Supports custom EDID and output resolutions - User-defined output resolutions up to 600 MHz pixel clock can be supported by uploading custom EDID files or capturing EDID from a display or other destination device.
HDCP authentication and signal presence confirmation - Provides real-time verification of HDCP status for each digital video input and output. This allows for simple, quick, and easy signal and HDCP verification through RS‑232, USB, or Ethernet, providing valuable feedback to a system operator or helpdesk support staff.
HDCP Visual Confirmation - When HDCP-encrypted content is transmitted to a non‑HDCP compliant display, a full screen green signal is sent to the display for immediate visual confirmation that protected content cannot be viewed on that display.
Aspect ratio control - The aspect ratio of the video output can be controlled by selecting a FILL mode, which provides a full‑screen output, or a FOLLOW mode, which preserves the original aspect ratio of the input signal.
Motion-adaptive deinterlacing for signals up to 1080i - Advanced deinterlacing for all interlaced signals up to 1080i delivers optimized image quality.
Automatic 3:2 and 2:2 pulldown detection - Advanced film mode processing techniques that help maximize image quality for content sources that originated from film.
Auto‑Image™ setup - When activated, the unit automatically optimizes the image by analyzing and adjusting to the video input signal. This can save time and effort in setting up a newly connected source, particularly in presentation environments where different guest presenter laptops with various output resolutions will be connected.
Auto Input Memory - When activated, the unit automatically stores size, position, and picture settings based on the incoming signal. When the same signal is detected again, these image settings are automatically recalled from memory.
Input presets - Memory presets are available to store and recall optimized image settings.
Output muting control - Video and audio output may be muted independently.
Image freeze control - A live image can be frozen using RS‑232, USB, or Ethernet control.
On‑screen menus - Intuitive on‑screen menus allow for easy system setup using the front panel controls. Key parameters such as input and output video formats are conveniently grouped on the initial Quick Setup screen, while additional screens provide full control over the unit's other functions and settings.
Picture controls for brightness, contrast, and detail, as well as horizontal and vertical sizing, positioning, and overscan
Internal video test patterns and pink noise generator for calibration and setup - The DTP2 CrossPoint 82 provides several video test patterns and audio pink noise to facilitate proper system setup and calibration of display devices.
HDMI to DVI Interface Format Correction - Automatically enables or disables embedded audio and InfoFrames, and sets the correct Colour space for proper connection to HDMI and DVI displays.
Automatic Colour bit depth management - Automatically adjusts Colour bit depth based on the display EDID, preventing Colour compatibility conflicts between source and display.
Audio file playback - Up to 16 pre‑recorded messages may be stored and played back over the program audio output.
Audio breakaway - Provides the capability to break two-channel audio away from its corresponding video signal and route to the DTP2 and audio outputs, allowing the audio and video signals from one source to be switched to different destinations.
Two mic/line inputs with 48‑volt phantom power - Two mic or line-level audio sources can be independently mixed with program audio. Selectable 48‑volt phantom power allows the use of condenser microphones.
Two independent line inputs - Two line-level audio sources, or a single audio source such as a conferencing codec, can be independently mixed with program and mic audio.
Mic ducking - Automatically reduces program audio when a microphone or line-level incoming audio signal is detected, replacing the need for a separate audio ducking processor.
Studio grade 24‑bit/48 kHz analog-to-digital and digital-to-Analogue converters - Professional converters fully preserve the integrity of the original audio signal.
Low latency DSP processing - The DTP2 CrossPoint 82 features very low, deterministic latency from input to output, regardless of the number of active channels or processes. This keeps audio in sync with video and prevents distractions to presenters or performers resulting from delayed live audio.
Group masters - Provides the capability to consolidate gain or mute control throughout the system. Gain or mute controls can be selected and added to a group master, which can then be controlled by a single master fader or mute control. Up to 32 group masters can be created.
Soft limits provide optimal group master adjustment range - The group master volume range can be limited using soft limits to maintain optimal minimum and maximum levels when using external volume control. This prevents operators from over or under-adjusting levels when using Ethernet, USB, or RS‑232 control.
Audio switching transitions - Audio output level automatically ramps down and then ramps up to match the video during switching transitions.
Integrated audio delay - Audio output is automatically delayed, compensating for latency introduced by the video processing.
Supports multiple embedded audio formats - The DTP2 CrossPoint 82 is compatible with a variety of audio formats, providing reliable operation with HDMI sources.
Output Standby Mode - Can be set to automatically mute video and sync output to the display device when no active input signal is detected. This allows the projector or flat panel display to automatically enter into standby mode to save energy and enhance lamp or panel life.
Power Save Mode - Capability to be placed in a low power standby state to conserve energy when not in use.
QS-FPC™ - QuickSwitch Front Panel Controller with tri Colour backlit buttons - Provides a discrete button for each input, allowing for simple, intuitive operation. Buttons can be custom labeled for easy identification. The buttons illuminate red, green, or amber depending on function, for ease of use in low light environments
Front panel security lockout - Locks out all front panel functions; however, all functions are available through Ethernet, USB or RS‑232 control.
Ethernet monitoring and control - Enables control and proactive monitoring over a LAN or WAN.
Built-in Web pages - Enables the use of a standard browser for device monitoring and troubleshooting over an intuitive Web interface.
RS-232 control port - Facilitates the use of serial commands for integration into a control system. Extron products use the SIS™ - Simple Instruction Set command protocol, a set of basic ASCII commands that allow for quick and easy programming.
Front panel USB configuration port - Enables easy system configuration without having to access the rear panel.
Front panel LED indicators for signal presence, HDCP status, and power - Provides visual indication of system status for real-time feedback and monitoring of key performance parameters.
RJ‑45 signal and link LED indicators for DTP port - Provides a means for validating signal flow and operation, allowing quick identification of connectivity issues.
Easy setup and commissioning with Extron's PCS - Product Configuration Software - Conveniently configure multiple products using a single software application.
Rack-mountable metal enclosure - The standard DTP2 CrossPoint 82 matrix switcher features a 1U, full rack width metal enclosure. Models with a built‑in power amplifier and control processor are housed in a 2U, full rack width metal enclosure.
Includes LockIt® HDMI cable lacing brackets
Internal Extron Everlast™ power supply - Provides worldwide power compatibility, with high‑demonstrated reliability and low power consumption for reduced operating cost.
Extron Everlast Power Supply is covered by a 7‑year parts and Labour warranty