The WPN-12 is a receiver for computer graphics video with resolutions ranging from VGA through UXGA and higher, component video, s-Video (Y/C) or composite video signals. It is used in conjunction with a WPN-11 transmitter.
Kramer WPN-12 Features
High Bandwidth - 450MHz (-3dB)
HDTV Compatible
Front Panel Connections - 15-pin HD and 3 RCAs for component video, s-Video (Y/C) or composite video outputs
Rear Panel Connections - Terminal block input
Wall Plate - single gang
Kramer WPN-12 Specifications
Inputs:
WPN 11: 1 XGA on an HD15F connector; 1 composite video 1 Vpp/75O, 1 s Video, 1 Vpp/75O (Y), 0.3Vpp/75O (C), YUV / RGB (on RCA connectors); WPN 12: INPUT FROM LINE on terminal block connectors
Outputs:
WPN 11: OUTPUT TO LINE on terminal block connectors; WPN 12: 1 XGA on an HD15F connector; 1 composite video 1 Vpp/75O, 1 s Video, 1 Vpp/75O (Y), 0.3Vpp/75O (C), YUV / RGB (on RCA connectors)
Max. Output Level:
2.6Vpp
Bandwidth (-3Db):
450MHz, Fully Loaded
Diff. Gain:
0.05%
Diff. Phase:
0.05 Deg.
K-Factor:
<0.05%
S/N Ratio:
74dB
Crosstalk (all Hostile):
–56dB
Coupling:
DC
Power Source:
12 VDC, 110mA
Dimensions:
6.9cm x 4.3cm x 11.4cm (2.72" x 1.70" x 4.49", W, D, H)
)
