Kramer WP-110 Computer Graphics to twisted pair line transmitter
The WP-110 is a twisted pair transmitter for computer graphic video signals with resolutions ranging from VGA through UXGA and higher. It converts a computer graphics video signal into a twisted pair signal which will be converted back into a computer graphic signal when used in conjunction with the TP-120 twisted pair receiver (or other compatible Kramer receiver).
Kramer WP-110 Features
Resolution - Up to UXGA
HDTV Compatible
Power Connect™ System - Only one unit in a system, the transmitter or the receiver needs to be connected to a power source. All the system units must have the Power Connect system to use this feature.
Advanced Sync Processing - Ensures compatibility with a wide range of computers.
Cable - UTP (unshielded twisted pair) such as CAT 5.
Wall Plate - Single gang
Kramer WP-110 Specifications
Inputs:
1 VGA / UXGA on an HD15 connector
Outputs:
1 RJ 45 LINE OUT connector
Bandwidth (-3Db) :
>150MHz, Fully Loaded
Diff. Gain:
2.9% (worst case)
Diff. Phase:
0.3 Deg (worst case)
K-Factor:
<0.05%
S/N Ratio:
69dB (worst case)
Coupling:
AC
Power Source:
12 VDC 60mA
Dimensions:
USA: 6.9cm x 3.8cm x 11.4cm (2.72" x 1.5" x 4.5", W, D, H); Belgium and Germany: 8cm x 3.8cm x 8cm (3.15" x 1.5" x 3.15", W, D, H); UK and most of Europe: 8.6cm x 3.8cm x 8.6cm (3.39" x 1.5" x 3.39", W, D, H)
)
