One Component Input, Eight Component Outputs The 1:8 Component CAT5 Distribution Amplifier is the perfect solution for anyone who needs to send one source to multiple displays in remote locations at the same time. The 1:8 Component CAT5 Distribution Amplifier has eight RJ-45 output connector and one Component input. The 1:8 Component CAT5 Distribution Amplifier's RJ-45 connectors are connected to up to eight Component CAT5 Distribution Amplifier receivers using industry standard CAT5 cables. The receivers can be placed up to 330 feet away from the transmitter.
How it works Simply connect your Component video source to the 1:8 Component CAT5 Distribution Amplifier's input using the supplied VGA to Component cable. Then connect up to eight Component displays to the Component CAT5 receivers. Then power the 1:8 Component CAT5 Distribution Amplifier and the receivers will get power from the CAT5. The Component displays attached to the 1:8 Component CAT5 Distribution Amplifier MUST support the HDTV resolution outputted by the source in order to get a picture. |
| |
Gefen EXT-COMP-CAT5-148S Specifications |
| Video Amplifier Bandwidth | 350 MHz |
| Input Video Signal | 1.2 volts p-p |
| Input Sync Signal | 5 volts p-p (TTL) |
| Horizontal Frequency Range | 15 - 70 KHz |
| Vertical Frequency Range | 30 - 170 Hz |
| Video In | HD-15 |
| Video out | 3 RCA Component |
| Link Connector | RJ-45 shielded |
| Power Supply | 5 VDC (External) |
| Power Consumption | 30 Watts (max.) |
| Sender Dimensions | 8.5"W x 1.75"H x 4.5"D |
| Receiver Dimensions | 3.75"W x 1.25"H x 2"D |
| Shipping Weight | 3 lbs. |
| Package Contents | 1:8 Component CAT5 Distribution Amplifier |
| 6 foot VGA to Component cable |
| One 5V external power supply |