Sapphire SAPPL04 Description
The Sapphire SAPPL04 projector lift is our entry level lift with a drop of up to one metre when fully extended. You can use the motor stops to adjust this and make it stop short if you do not require the full drop.
Sapphire SAPPL04 Key Features
- Can be fitted into a small space. If you have a very small projector it will even fit into a standard 7 inch ceiling joist if you have 12.5mm plaster board below..
- The larger projectors fit under the grid and are fitted by bolts through the wire mesh plate (included).
- Supplied with wall switch, optional remote control kit available.
- Smart bottom plate that requires no decoration and will blend in with most suspended ceiling tiles - size is 595mm x 595mm.
- Maximum drop of 1 metre
- Maximum projector size of 300x340x130 (Width x Length x Height)
- 3 year warranty
£483 (£579.60 inc. VAT)
Availability: In stock