£465 (£558.00 inc. VAT)
Availability: In stock
Lightware DVI-TP-TX200DL Description
Dual Link DVI reclocking extender over CAT5 ... CAT7 twisted pair cable
Lightware TP-DL series transceivers are Dual Link DVI over twisted pair extenders which transmit dual link DVI-D signals over two CAT5, CAT6A or CAT7 cables. Accessible distances depend on the used cable quality and signal resolution. The DVI-TP-TX200DL transmitter includes an EDID Manager and built-in DVI distribution amplifier for local monitor output. Only two CAT cables are needed for Dual Link DVI signal transmission, there is no need for third CAT cable to transmit EDID. If a lower resolution single link signal is transmitted, only one CAT cable is needed between the transmitter and the receiver.
TP-DL series transceivers support the highest resolutions up to 3840x2400 including all HDTV resolutions: 720p, 1080p, 2K.
DVI-TP-TX200DL stores and emulates 100 EDID, 50 of which are factory preset and 50 are user programmable.
DVI-TP-RX100DL is a high performance Dual Link twisted pair reclocking receiver with Automatic and precise Manual cable EQ (equalization) adjustment. It incorporates Lightware's TMDS Reclocking function, which eliminates pixel errors and noise from the video signal.
All transceivers can be rack mounted or used standalone.
Lightware DVI-TP-TX200DL Key Features
- TMDS Reclocking
- Intra-pair skew compensation
- Jitter compensation
- 50 meter long Dual Link DVI signal transmission at 2560x1600 resolution (using two CAT cables)
- 50 meter long Single Link DVI signal transmission at 1920x1080p resolution (using one CAT7 cable)
- Advanced EDID Management
- 50 programmable EDID memory addresses
- Local monitor output
- Locking DC connector for secure connection
- Source detection and Monitor detection LED