The EQUALIZER INTERFACE™ is an interface that enables Computer and Video signals to be automatically adapted to different monitors, projectors and other video display requirements. The EQUALIZER INTERFACE™ also has a BOOSTER-EQUALIZER function. You can drive, up to 300 m - 1000 ft, either high-resolution signals from any WORKSTATION, PC, MAC (up to 1600x1280) graphic boards, or standard VIDEO/YUV signals. Then, a new High End Corrector Cable function, very useful and adaptable to many cable lengths (in 25 m - 75 ft steps), allows you to have the best picture possible (Sharp Echo Free) dedicated to your application.
Analog Way Equalizer Interface Specifications
Bandwidth
300MHz
Cables lengths
Upto 300m
Inputs
Frequency
15-135kHz horizontal
30-120Hz vertical
Signal type
RGsB, R-Y/Y/B-Y, RGBS, RGBHV
Composite sync
0.3 to 5V
H&V Sync
5V TTL
Terminals
15 pin d-sub or 3/4/5 BNC
Outputs
Local monitor
15 pin d-sub
Output 1
Equalized with cable length corrector upto 300m
Output on 3/4/5 BNC
Output 2
Dry for display up 100m distance
Output on 15 pin d-sub
User controls
Power
LED
Sync Out
Output sync selection (SOG, Composite or H&V)
SOG
Sync on green on/off
Sharpness
Equalizer = 4 switch for calbe length compensation